Updated National Stock Numbers

terminal crim contact positioner nsn 5120000176419. a few of the cage codes are z1q73 k7867 11851 f7391 c1129 and u0419

matched capacitor set nsn 5910000181292.

body length 0.25 inches

ceramic dielectr fixed capacitor nsn 5910000181215. the reliability indicator is not established. the terminal length is 1.5 inches. the terminal diameter is between 0.023 inches and 0.028 inches.

structural beam nsn 9540000176413. the heat treatment is t-3511 solution heat treated. the nondefinitive spec/std data is 2024 alloy and 3511 temper. the leg thickness is 0.485 inches.

extended washer self-locking nut nsn 5310000176186. the temp rating is 900.0 degrees fahrenheit

teletypewriter pull bar nsn 5815000176422. other reference numbers are 37073 and 6002-137 and the cage codes are 26344 and 05869

flat washer nsn 5310000176103. the overall diameter is between 0.26in. and 0.28in. ⁓9/32

reel shaft nsn 7025000189518.

shim nsn 5365000176085. the material is copper alloy

hexagon head cap screw nsn 5305000175156. the width between flats is 0.437 inches

close tolerance screw nsn 5305000175131. the grip diameter is between 0.1885 inches and 0.1895 inches

hexagon self-locking nut nsn 5310000175125. the material is steel comp 1212 nut

hexagon slotted plain nut nsn 5310000175079. the bearing surface type is chamfered or washer faced

link nsn 5821000174995. another reference number is 547-5300-002 and the cage code is 13499

ring spacer nsn 5365000175102. the overall thickness is 0.187 inches

tapping screw nsn 5305000175578. the nonmachine nominal thread diameter is 0.164 inches

roller bearing nsn 3110000175531. another reference number is 2j0808. the cage code is 11083. another reference number is 2j808. the cage code is 11083.

machine screw nsn 5305000175162. the screw material is steel. the screw surface treatment is cadmium or zinc. the hardness rating is between 95.0 rockwell b and 100.0 rockwell b.

printer cylinder nsn 5815000176942. other reference numbers are 38073 and 6002-244

hexagon plain nut nsn 5310000174856. the material is steel and the surface treatment is cadmium or zinc

pre wire wound variable resistor nsn 5905000174700. the shaft end play is 0.05 inches. the shaft runout is 0.01 inches. the shaft bearing type is ball.

frequency rating 50 hertz single component and 400 hertz single component body length 4.125 inches

terminal length 1.375 inches maximum operating temp 100 degrees celsius

plastic length 12.625 in. diameter 1.25 in.

pump wear plate nsn 1660000173454.

copper material

aluminum material

overall width 4.5 inches

overall length 2.4in. ⁓2-13/32 winding dc resistance rating 900 ohms single winding