Updated National Stock Numbers

diameter 18 inches iron cast material

overall length 12in. ⁓12-1/64 steel material

frequency in hertz 60

first end outside diameter tube accommodated 1.63 inches first end seat angle in deg 37

spur gear-slip clutch nsn 3020000172589. the attachment method is clamp. the bore style is plain both ends. the material is steel corrosion resisting.

spur antibacklash gear nsn 3020000172587. the attachment method is clamp. the pressure angle is 20 degrees. the pitch diameter is 1.33 inches.

outside diameter between 0.49 inches and 0.5 inches

gear cluster nsn 3020000185818. the attachment method is mounting hole. the bore style is plain both ends. the design type is spur first and second gear.

ammeter nsn 6625000194049. the material is plastic. the style designator is round flush mtg. the movement suspension method is jewel pivot base.

aircraft skin nsn 1560000194025. another reference number is 2-23602-1. the cage codes are 76823 and 0jrc1.

vehicular clutch disk with a spline major diameter of 13.95 inches. the thickness measures at 0.74in. ⁓3/4. the largest outside diameter is 13.95 inches. the lug width is 2 inches. the smallest inside diameter is 6.97 inches. nsn 2520000196086.

steel blee selector slide. nsn 2995000192617. another reference number is 510214. the cage codes are 77445 and 52661.

straight metal tube assembly. nsn 4710000192210. another reference number is 500880. the cage codes are 11449 33830 and 77445.

metal tube assembly. nsn 4710000192209. another reference number is 500878. the cage codes are 77445 21890 05813 11449.

power transformer that has a center to center distance between mounting facilities parallel to length of 2.812 inches. has a center to center distance between mounting facilities parallel to width of 2.062 inches. nsn 5950000195892.

radio frequency transformer has a frequency rating of 30.0 kilohertz single component. the coil form type is a solid single component. nsn 5950000195887.

radio frequency radiati absorber nsn 6625000191665. another reference number is 917804-9. the cage code is 98897.

drive assembly gear made by honeywell international inc. nsn 3020000195697.

sleeve bushing with an overall length of 0.150in. ⁓5/32. the body outside diameter measures 0.153 inches while the inside is 0.118 inches. nsn 3120000195690.

frame made by honeywell international inc. nsn 5826000195686.

aluminum alloy anodize

indica housing assy nsn 6610000195459.

housing assembly nsn 6620000195488.

switch with a throw quantity of 3 each section rear. the mounting method is threaded bushing single mounting facility. the shaft type is round single actuator. nsn 5930000195311.

nsn 3040-00-019-5378. push-pull control assembly. the travel distance is 3 inches. has a t-handle and adapter. the core is made of steel. the effective length is between 37.75 inches and 40.75 inches.

p/o camera body assembly cai div of bourns inc (11871) part no. 7911-120 used on body drive cai div of bourns inc (11871) part no 6051-100-5 end item camera still picture jptds (06400) ka-76a

titanium material

operating current in amps 375

metallic eyelet nsn 5325000188482.

copper alloy or steel or stainless steel body material