Updated National Stock Numbers

support assembly nsn 6115000145544. end item identification is 6115-00-758-5492 gas turbine engine generator set

fluid filter element nsn 2910000145532. the filtering media design is pleated single filtering media response

annular ball bearing nsn 3110000145523. the inner ring width is 0.1240 inches

reactor nsn 5950000145518. the reliability indicator is not established

indicator light nsn 6210000145512. the lens type is cylindrical knurled single light 1st position horizontal

drive screw nsn 5305000145367. the fastener length is 0.188inches. ⁓13/64inches

drive screw nsn 5305000145366. the head height is between 0.059inches. and 0.069inches. ⁓5/64inches

drive screw nsn 5305000145364. the head style is round and the head diameter is between 0.09 inches and 0.099 inches also the head height is between 0.026inches. and 0.034inches. ⁓3/64inches

drive screw nsn 5305000145361. the pilot diameter is between 0.046 inches and 0.049 inches

tapping screw nsn 5305000145327. the head style is pan and the head diameter is between 0.36 inches and 0.322 inches also the head height is between 0.085inches. and 0.096inches. ⁓7/64inches

tapping screw nsn 5305000145255. the head style is oval countersunk undercut and the head diameter is between 0.34 inches and 0.385 inches also the head height is 0.116inches. ⁓1/8inches

tapping screw nsn 5305000145254. the nonmachine thread style is dog type (type b or c) and the nonmachine nominal thread diameter is 0.164 inches

tapping screw nsn 5305000145242. the head style is oval countersunk and the head diameter is between 0.244 inches and 0.279 inches

tapping screw nsn 5305000145193. the head height is 0.099 inches minimum and 0.110 inches maximum.

tapping screw nsn 5305000145191. the fastener length is 0.500 inches

tapping screw nsn 5305000145183. the fastener length is 0.312 inches

tapping screw nsn 5305000145181. the features provided is casehardened

tapping screw nsn 5305000145131. the head diameter is 0.443 inches minimum and 0.472 inches maximum.

tapping screw nsn 5305000144894. the countersink angle is 80.0 degrees minimum and 82.0 degrees maximum.

tapping screw nsn 5305000144815. the nonmachine thread style is gimlet point (type a ab or ba)

bearing support nsn 6115000145637.

indicator light nsn 6210000145506. the overall length is 1.215 inches

indicator light nsn 6210000145505.

plate spacer nsn 5365000145474.

safety washer nsn 5310000145473.

holder nsn 6115000145472.

ring spac nsn 5365000145469.

electrical lead nsn 6150000145033. the sectional shape style cross is round

shouldered shaft nsn 3040000145020.

fuel control sens metering valve nsn 2835000145017. the end item identification is 61157585492