Updated National Stock Numbers

thermal relay nsn 5945000190875. the overall length is 1.375in. ⁓1-3/8. the overall height is 2.375 inches. the overall width is 1 inches.

solid rivet nsn 5320000189512.

nsn 4820000190476. the thread direction is right-hand 1st end. the flow control device is disk. the valve discharge flow rate is 110 cubic feet per minute.

spur antibacklash gear nsn 3020000190164. the attachment method is clamp. the pitch diameter is 1. the teeth quantity is 96. the nominal overall length is 0.281 inches.

speed decreaser gear assembly nsn 3010000190166. the output shaft type is straight. the output shaft quantity is 1. the shaft position is shaft protrudes to rear.

adjustable resistor nsn 5905000180963. the style designator is radial terminal each end. the terminal type is tab solder lug. the inclosure method is uninclosed.

electronic components assembly nsn 5998000190151. the part name assigned by controlling agency is fsc application data: antenna-receiver-transmitter group missile tracking.

air dielectri variable capacitor nsn 5910000180951. the overall length is 0.73in. ⁓47/64 and the overall height is 1.83 inches also the overall width is 0.658 inches

thermal resistor nsn 5905000180947. the terminal length is 1.5 inches

terminal board nsn 5940000190142. the body style is taper pin. the terminal row quantity is 1. the center to center distance between terminals is 0.16 inches.

quartz crystal unit nsn 5955000180944. the terminal length is between 0.223 inches and 0.248 inches

socket head cap screw nsn 5305000190149. the fastener length is 0.875in. ⁓7/8. the head style is flat chamfer. the head diameter is between 0.553 inches and 0.562 inches.

setscrew nsn 5305000190734. the thread class is 3a. the thread direction is right-hand. the thread length is 0.375 inch ⁓3/8.

actuator diameter between 0.24 inches and 0.246 inches

audio frequency transformer nsn 5950000180974. the inclosure type is fully inclosed. the reliability indicator is not established. the terminal type and quantity is 9 turret.

machine screw nsn 5305000191633. the head style is flat countersunk. the head diameter is between 0.15 inches and 0.172 inches. the internal drive style is slot.

machine screw nsn 5305000191630. the thread class is 2a. the thread direction is right-hand. the thread length is 1.75in. ⁓1-3/4.

shank length 0.453 inches

assembled washer bolt nsn 5306000191679. the fastener length is 1in. ⁓1/64. the head style is hexagon. the washer quantity is 1.

gasket nsn 5330000180790. the material is rubber chloroprene class cr. the material document and classification is mil-r-6855cl 2gr 80 mil spec single material response. the style designator is circular.

hexagon head cap screw nsn 5305000180141. the nominal thread diameter is 0.438in. ⁓29/64

preformed packing nsn 5330000190619.

metal case electrical filter assembly nsn 5915000191518. has 3 connector receptacle terminals; 24 solder lug terminals; 8 resistors; 54 capacitors 20 inductors. nsn 5915000191518.

hexagon head cap screw nsn 5305000180129. the hardness rating is 23.0 rockwell c and 30.0 rockwell c

hexagon head cap screw nsn 5305000180125. the material is steel

hexagon head cap screw nsn 5305000180124. the head height is 0.234in. ⁓15/64

nsn 1615-00-019-0217 tail shaft assembly made by bell helicopter textron inc. consists of an uh-1 airframe unit power train.

steel nozzle holder made by cummins power generation inc. has a black oxide finish. nsn 2910000185355.

adjuster with 0.87 in. lg; 0.17 in. dia. nsn 6610000185116. made by alliedsignal inc.

bracket made by honeywell international inc. nsn 6610000185113.