Updated National Stock Numbers

frame made by honeywell international inc. nsn 5826000195686.

aluminum alloy anodize

indica housing assy nsn 6610000195459.

housing assembly nsn 6620000195488.

switch with a throw quantity of 3 each section rear. the mounting method is threaded bushing single mounting facility. the shaft type is round single actuator. nsn 5930000195311.

nsn 3040-00-019-5378. push-pull control assembly. the travel distance is 3 inches. has a t-handle and adapter. the core is made of steel. the effective length is between 37.75 inches and 40.75 inches.

p/o camera body assembly cai div of bourns inc (11871) part no. 7911-120 used on body drive cai div of bourns inc (11871) part no 6051-100-5 end item camera still picture jptds (06400) ka-76a

titanium material

operating current in amps 375

metallic eyelet nsn 5325000188482.

copper alloy or steel or stainless steel body material

cutting tip nsn 3433000188105.

right ha lock plate nsn 3610000187730.

locked in stud nsn 5307000185855. the locking feature is ring lock keyed. the thread quantity per inch is 14 stud thread. the thread quantity per inch is 24 nut thread.

locked in stud nsn 5307000185854. the thread class is 3a stud thread and 3a nut thread. the thread direction is right-hand nut and stud thread. the locking feature is ring lock serrated.

miniature ceramic w/microdot side connector 2.25 mhz frequency 0.25 in. by 0.25 in. element size 90 degrees beam angle sound propagation in steel and aluminum 0.69 in. length 0.59 in. in. width 0.33 in. dp

nominal overall length 0.686 inches

mounting hole diameter between 0.654 inches and 0.664 inches lock test current rating in amps 500

overall length 3.19in. ⁓3-13/64 overall height 1.569 inches

overall length 48.12in. ⁓48-1/8

overall length 2.061in. ⁓2-1/16 copper material

securing device type threaded fastener

annular ball bearing nsn 3110000184684. the overall width is 1.375 inches

nonmetallic hose assembly nsn 4720000184681. the inside diameter is 0.625 inches

the overall width is 6.0 inches

knob nsn 5355000184481. the setscrew hole quantity is 2. the overall depth is 0.344 inches. the gripping surface condition is grip aid.

preformed hose nsn 4720000184558. the wall thickness is 0.188 inches

the material is steel conductor accommodation and the surface treatment is zinc conductor accommodation single layer

headed straight pin nsn 5315000173318. the head style is flat fillister

fastener length between 0.844in. and 0.96in. ⁓31/32