Updated National Stock Numbers

assembled washer screw nsn 5305000178466. the primary washer outside diameter is between 0.37 inches and 0.381 inches

bolt hole diameter 0.46 inches second end steel material

cowling nsn 1560000178274. the material is aluminum alloy 2024

sequential timer nsn 6645000178252. the overall width is 2.43 inches

ventilator cover nsn 1430000178216. the cage codes are 65609 54297 49956 and 18876

drs environmental systems inc. preformed packing nsn 5330000189817.

upper receiver nsn 1005000179550. other reference numbers are 62306 and 8448603 also the cage codes are 13629 and 19200

plastic or rubber shoulder gun stock.

other reference numbers are 62278 and 8448524

wing plain nut nsn 5310000177994. the body diameter is 0.688 inches

line actuating cylinder assembly nsn 2590000177988. the cage codes are 97907 14108 and 14108

steel material

the point type is any acceptable

bevel gear nsn 3020000178037. another reference number is ek2-8 and the cage code is 00141

permanent magnet nsn 5999000176954. the fsc application data is teletype and facsimile equipment

fluid filter head nsn 1650000177765. the bowl mounting method is thread

switch actuator arm nsn 5930000177760. another reference number is 1433-643380 and the cage code is 09523

hexagon plain nut nsn 5310000177573. the width across flats is 0.5in. ⁓1/2

socket head cap screw nsn 5305000189802.

9 in. lg 0.062 in. h

outside diameter 0.8 inches

teletypewriter subassembly nsn 5815000176837. the cage codes are 26344 and 05869

number tape holder nsn 5815000176441. the surface treatment is passivated

terminal crim contact positioner nsn 5120000176419. a few of the cage codes are z1q73 k7867 11851 f7391 c1129 and u0419

matched capacitor set nsn 5910000181292.

body length 0.25 inches

ceramic dielectr fixed capacitor nsn 5910000181215. the reliability indicator is not established. the terminal length is 1.5 inches. the terminal diameter is between 0.023 inches and 0.028 inches.

structural beam nsn 9540000176413. the heat treatment is t-3511 solution heat treated. the nondefinitive spec/std data is 2024 alloy and 3511 temper. the leg thickness is 0.485 inches.

extended washer self-locking nut nsn 5310000176186. the temp rating is 900.0 degrees fahrenheit

teletypewriter pull bar nsn 5815000176422. other reference numbers are 37073 and 6002-137 and the cage codes are 26344 and 05869