Updated National Stock Numbers

square neck bolt nsn 5306000149531. the thread direction is right-hand.

plate plain nut nsn 5310000149527. the mounting hole diameter is 0.105 inches

control panel assembly nsn 1560000149524. the end item identification is aircraft model uh1

headless straight pin nsn 5315000149518. the hardness rating is 26.0 rockwell c minimum and 32.0 rockwell c maximum

tapping screw nsn 5305000149501. the width between flats is 0.367 inches minimum and 0.375 inches maximum

machine bolt nsn 5306000149474. the fastener length is 0.922 inches minimum and 0.969 inches maximum

flat washer nsn 5310000149467. the sectional shape style cross is rectangular

gasket nsn 5330000149460. the sectional shape style cross is solid single or composition

wood screw nsn 5305000149427. the countersink angle is 80.0 degrees minimum and 82.0 degrees maximum

wood screw nsn 5305000149400. the nonmachine nominal thread diameter is gimlet point (type a ab or ba)

wood screw nsn 5305000149412. the head diameter is 0.437 inches minimum and 0.491 inches maximum.

wood screw nsn 5305000149403. the fastener length is 0.953 inches minimum and 1.000 inches maximum

wood screw nsn 5305000149394. the material is copper alloy 260 or copper alloy 268 or copper alloy 260 or copper alloy 268 or copper alloy 260 or copper alloy 270

wood screw nsn 5305000149367. the head style is flat countersunk

wood screw nsn 5305000149355. the internal drive style is cross recess type 1.

wood screw nsn 5305000149926. the nonmachine thread style is gimlet point (type a ab or ba)

nonaircr combustion chamber case nsn 2835000150205. the special feature is that the welded assy consists of 8 components per mfr code 99193 dwg 75746.

boiler tube nsn 4410000191278. the wall thickness is 0.134 inches. the nominal outside diameter tube accommodated is 2 inches. the material is steel.

wire wound fixed resistor nsn 5905000181052. the electrical resistance is 400.0 ohms and the resistance tolerance in percent is -1.0 to 1.0

electrical connector potting mold nsn 5935000181006. the overall length is 0.969in. ⁓31/32 and the overall diameter is 0.578in. ⁓37/64

machine bolt nsn 5306000181004. the thread length is 0.875in. ⁓7/8

boiler tube nsn 4410000191274. the wall thickness is 0.134 inches. the nominal outside diameter tube accommodated is 2 inches. the material is steel.

electrical receptacle connector nsn 5935000180998. the distance between mounting facility centers is between 1.85 inches and 1.857 inches

electrical plug connector nsn 5935000180997. the thread class is 2b. the thread direction is right-hand. the thread series designator is unef.

nonwire wound variable resistor nsn 5905000180992. the section quantity is 1. the reliability indicator is not established. the actuator type is single shaft.

thermal relay nsn 5945000190875. the overall length is 1.375in. ⁓1-3/8. the overall height is 2.375 inches. the overall width is 1 inches.

solid rivet nsn 5320000189512.

nsn 4820000190476. the thread direction is right-hand 1st end. the flow control device is disk. the valve discharge flow rate is 110 cubic feet per minute.

spur antibacklash gear nsn 3020000190164. the attachment method is clamp. the pitch diameter is 1. the teeth quantity is 96. the nominal overall length is 0.281 inches.

speed decreaser gear assembly nsn 3010000190166. the output shaft type is straight. the output shaft quantity is 1. the shaft position is shaft protrudes to rear.