NSN 5990-00-904-3314 is available in the following condition(s).
NS:
4
NE:
13
AR:
1
10/29/2024 was the last date inventory was updated
for this national stock number.
Availability
Send us a request for quote for this nsn with your required quantity and basic reply-to information
and our team will send you a price quote via email immediatley. If you have any questions call us at
1 (405) 213-0075
Have a Question?
CALL 1 (405) 213-0075
Manufacturer Datasheet
SKU: 5990-00-904-3314 Model: VTRX23/4N3
MRC
Name
Detail
MRC:
AAFZ
Body Material
Steel, stainless
MRC:
AAQL
Body Style
Standard round d
MRC:
AAVH
Shoulder Diameter
Between 1.9850 inches and 1.9900 inches
MRC:
AAVL
Pilot Diameter
0.5950 inches
MRC:
AAZW
Second Shoulder Diameter
Between 1.9985 inches and 1.9995 inches
MRC:
AAZX
Second Shoulder Length
0.1700 inches
MRC:
ABHP
Overall Length
4.2990 inches
MRC:
ABKK
Flange Diameter
Between 2.2490 inches and 2.2500 inches
MRC:
ABKU
Flange Thickness
0.2500 inches
MRC:
ABPM
Body Diameter
1.9900 inches
MRC:
ABWV
Shaft Diameter
0.2403 inches single shaft and 0.2405 inches single shaft
MRC:
ABXF
Shaft Length
0.7190 inches single shaft
MRC:
AFJN
Fragility Factor
Moderately rugged
MRC:
AHCG
Maximum Tempurature Rise
30.0 degrees celsius
MRC:
AJSL
Body Size
23
MRC:
AJSR
Rotor Input Voltage Rating In Volts
115.0
MRC:
AJSS
Frequency In Hertz
400.0
MRC:
AJST
Rotor Input Current Rating
720.0 milliamperes
MRC:
AJTN
Zss Impedance Magnitude In Ohms
Between 6.50 and 8.10
MRC:
AJTP
Zss Impedance Angle In Deg
Between 42.00 and 46.00
MRC:
AJVF
Phase Shift Angle In Deg
2.000 input to output
MRC:
AJVG
Maximum Fundamental Null Voltage In Millivolts Per Volt
30.00 output
MRC:
AJVH
Maximum Total Null Voltage Output In Millivolts Per Volt
150.00
MRC:
AJVL
Electrical Error Angular Range In Minutes
-6.0/+6.0
MRC:
AJVM
Spline Tooth Quantity
21 single shaft
MRC:
AJVN
Receiver Error Angular Range In Minutes
-45.0/+45.0
MRC:
AJVV
Torque Gradient Per Angular Deg
0.250 inch-ounces
MRC:
AJWQ
Pilot Length
0.0430 inches
MRC:
AJWR
Shoulder Length
0.2500 inches
MRC:
AJWV
Aft Of First Flange Diameter
Between 1.9985 inches and 1.9995 inches
MRC:
AJWX
Mounting Surface To Terminal End Distance
3.5800 inches
MRC:
AJXA
Spline Tooth Diametral Pitch
96 single shaft
MRC:
AJYY
Shaft Thread Series Designator
Unf single shaft
MRC:
AKAF
Shaft Thread Direction
Right-hand single shaft
MRC:
AKAN
Shaft Thread Class
2a single shaft
MRC:
CQTM
Terminal Location
Rear
MRC:
CQWQ
Shaft Thread Length
0.2900 inches single shaft
MRC:
CRSJ
Shaft Type
Spline w/threads single shaft
MRC:
CSJY
Transformation Ratio
0.783 rotor to stator
MRC:
CWBH
Shaft Thread Size
0.250 inches single shaft
MRC:
TEST
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Factory New (FN), New Material (NE), New Unused Surplus (NS), Overhauled (OH), Serviceable (SV),
Repairable (RP), and AS Removed / Used (AR) material will be accompanied by a Certificate of Conformance,
and any other documents/trace when applicable.
Delivery
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
Satisfaction
Your satisfaction is our success! At NationalStockNumber.parts
we believe that we have the best quality service out there. If you run
into any issues, we are here to solve them! Contact us by phone or email at any time.
