NSN 3950-01-463-5229 Power Operated Drum Winch

Availability

Send us a request for quote for this nsn with your required quantity and basic reply-to information and our team will send you a price quote via email immediatley. If you have any questions call us at 1 (405) 213-0075

Have a Question?
CALL 1 (405) 213-0075

Manufacturer Datasheet

SKU: 3950-01-463-5229 Model: 4WS6M12-S22

MRC

Name

Detail

MRC:

AAXH

Prime Mover Quantity

MRC:

ACDC

Current Type

MRC:

ADZC

Environmental Protection

Any acceptable

MRC:

AGAV

End Application

Winch; w/s nimitz class cvn

MRC:

AKDJ

Prime Mover Type

Electric motor

MRC:

AKNA

Inclosure Type

Partially enclosed

MRC:

AKPS

Duty Cycle

Intermittent

MRC:

APHE

Operation Method

Powered

MRC:

ATWD

Drum Flange To Flange Distance And Location

12.000 inches first drum

MRC:

ATWE

Drum Diameter And Location

9.000 inches first drum

MRC:

ATWF

Drum Flange Diameter And Location

14.000 inches first drum

MRC:

ATYG

Power Requirement Rating

5.00 horsepower

MRC:

ATYH

Drum Surface Design

Grooved

MRC:

BFMF

Cooling Method

Any acceptable

MRC:

ELEC

Voltage In Volts

460.0

MRC:

FAAZ

Phase

Three

MRC:

FEAT

Special Features

Worm/spur gear drive; 460-3-60 cycle input voltage; 3 hp tefc brake motor with ieee 45 marine duty rating; brake is dust tight water proof; electra gear reducer; total reduction ratio w/spur gear 228.50; load rating 3, 500 lbs 1st layer, 3000 mid drum, 2600 lbs full drum; line speed 19 fpm 1st layer, 22 fpm mid drum, 25 fpm full drum; groove for .5 in diameter cable develops approx 1.75 grooves per in of drum; one revolution of drum wraps approx 2.4 ft of cable; roller exerts pressure on cable as it winds on/off drum aids in keeping cable from jumping grooves with no load on cable; roller receives force from gas springs

MRC:

FREQ

Frequency In Hertz

60.0

MRC:

SUPP

Supplementary Features

Magnetic reversing starter mounted and wired to winch; starter includes contacts for forward/reversing motor, thermal overloads w/ adjustable setting fm 4.00-6.00 amps, control power transformer to reduce 460 v primary to 120v at op station; electronic overload sensor included which cuts current to motor when current exceeds preset max; switch is current activated, adjustable, resetting by reversing direction of op; sensor active in forward only; will not sense reduced current; starter soes not include plugs to power source; op station is nema 4 pushbutton station on 12 pt pendant with up/down legends

MRC:

NSN

3950014635229

MRC:

Supply Class

#3950 - Derricks Cranes Hoists Winches

MRC:

PMIC

Precious metal content is unknown.

MRC:

HMIC

No MSDS. No hazardous material.

MRC:

Unit of Issue

Manufacturers and Distributors

CAGE

Name

CAGE:

12437

THERN, INC.

Part Numbers and Brands

Part Number

Brand

4WS6M12-S22

Thern

Certificates

Factory New (FN), New Material (NE), New Unused Surplus (NS), Overhauled (OH), Serviceable (SV), Repairable (RP), and AS Removed / Used (AR) material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable.

Delivery

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Satisfaction

Your satisfaction is our success! At NationalStockNumber.parts we believe that we have the best quality service out there. If you run into any issues, we are here to solve them! Contact us by phone or email at any time.