5320-01-134-5840

99.0 degrees minimum and 101.0 degrees maximum

The included angle of the countersink.

serrated stem-type w

The device by which the item is expanded and set.

0.408 inches minimum and 0.428 inches maximum

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.251 inches minimum and 0.312 inches maximum

A measurement of the longest dimension of the grip,in distinction from width.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

ams 6322 assn std single material response stem

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

qq-a-430 fed spec single material response sleeve

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

aluminum alloy 5056 sleeve

The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 stem

The chemical compound or mechanical mixture properties of which the item is fabricated.

0.156 inches minimum and 0.160 inches maximum

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

self-plugging mechanically locked stem

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

ns" letters after the material code "b" indicate no preference to lock type (may be visible or internal). rivets with no letter code (indicating visible lock type) and rivets with the letter "h" after the material code (indicating internal lock type) are both acceptable for this item of supply.

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

mil-c-5541 mil spec single treatment response sleeve

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

qq-p-416,type 2,class 2 fed spec single treatment response stem

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

cadmium and chromate stem

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromate sleeve

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

A

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

A

Item does not contain precious metal.

X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

0000864

7616-10-3000

aluminum rivets

12300

Finished metal shapes

KG

Yes

69440

332722

VZ

A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

U

50.0

9

Other or no special handling required (sh)

Z

No special type of cargo code applicable

54760

576

Metal and metal products, nos, (less than 35 feet)

KZ

Southwestern power administration

106510

rivets i/s plain/galvanized etc

X