5306-01-462-7946

f/a-18e aircraft

The national stock number or the identification information of the end equipment for which the item is a part.

agav

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

2.294 inches minimum and 2.324 inches maximum

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.3735 inches minimum and 0.3745 inches maximum

The length of a straight line which passes through the center of the grip,and terminates at the circumference.

1.615 inches minimum and 1.635 inches maximum

A measurement of the longest dimension of the grip,in distinction from width.

0.327 inches minimum and 0.347 inches maximum

A measurement from the bottom to the top of the head,in distinction from depth.

spline extended washer

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

ams 5662 assn std single material response or ams 5663 assn std single material response overall

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

nickel alloy 718 overall

The chemical compound or mechanical mixture properties of which the item is fabricated.

220000 pounds per square inch

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

0.3750 inches

The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

32.0 microinches bearing surface of head

Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.

3a

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

right-hand

The direction of the thread when viewed axially. A right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

0.659 inches minimum

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

unjf

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

24

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

A

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

A

Item does not contain precious metal.

Y

The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restrictions or application.

N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

0015903

7508-90-0000

other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)

12300

Finished metal shapes

KG

Yes

69975

332999

BZ

A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

W

Rating variable

9

Other or no special handling required (sh)

Z

No special type of cargo code applicable

48950

573

Bolts or nuts (iron or steel),(less than 35 feet)

KE

093486

bolts,nuts or screws, noi (sub 3)

Z